Bright, easy-to-see LED clocks. These models are available in sizes from 2.25" and 4.0" (Bar Segment) to 6", 8", 12" and 18" high (Dot Matrix). The standard model is avaialble in HH:MM format. A six-digit model (HH:MM:SS) model is available also. An internal battery will keep the internal timing if power is lost.
The 2.25" and 4" models include two pushbuttons on the endcap are used for fast set and slow set. A terminal block inside the display can be used to wire in remote switches.
The 6", 8" and 12" models include a terminal block inside the display can be used to wire in remote switches. The customer-supplied, momentary switches are used for fast set and slow set.
Changing from 12 to 24 Hour Format:
PLEASE POWER OFF THE UNIT!
A knockout on the back of the enclosure can be removed to access a jumper that is in an 8-pin socket labeled U8 (across pins 7 and 8). Remove the jumper from this position and the display will show 24 hour time. Replace the jumper in U8 (across pins 7 and 8) to display 12 hour format. The knockout to access U8 is on the back of the cabinet.
||120VAC @ 60Hz.
||Max. 15 Watts
||Typical 700 mA
|Power Cord Length
||6 Foot Business Plug
|Indoor / Outdoor
||Designed to be installed and viewed indoor
||32 to 120 Degrees (0 to 49 Degress C) / 0 to 95% Humidity
||20"L x 8"H x 2.5"D
||Approx. 9 Lbs.
|Number of Digits
||Four (4) Digits
||4.0" High Numbers
||Up to 190 Feet Away
|LED Color / Acrylic Face
||Red / Green or Amber Optional
||10 MCD High-Intensity Digits
|Enclosure Color / Material
||Black Extruded Aluminum
|Enclosure NEMA Rating
||NEMA 1 Rated / NEMA 12 Optional
||Two Mounting Brackets Included for Hanging / Wall Mount
||One-Year Factory Service