Up / Down & Rate Counters | Products | Electronic Displays, Inc.

ED206-110-4D-AO-Stack

4 digit. Dimensions: 20"L x 4"H x 2.25"D Count up or down. Thumbwheel preset standard. Serial preset available. Two momentary inputs: increment/decrement by 1, preset to value. "Wet" or "Dry" contacts. Photo-eye, limit switch, etc. Ideal for assembly line production. Audible output and tower light activated when the display reaches "0".

Bright 2.25" LED Display
Dimensions: 20"L x 4"H x 2.25"D
Audible and visual output when the display hits "00:00". Up or Down Count by one.
Counter will advance or decrement by one with a contact closure, and reset to "0" with another contact.

ED206-110-4D-N1

4 digit. Dimensions: 16"L x 4"H x 2.25"D Count up or down. Thumbwheel preset standard. Serial preset available. Two momentary inputs: increment/decrement by 1, preset to value. "Wet" or "Dry" contacts. Photo-eye, limit switch, etc. Ideal for assembly line production.

Dimensions: 16"L x 4"H x 2.25"D
Bright 2.25" High LED Display with Four Digits
Counter will advance or decrement by "one" with a contact closure and preset to customer-defined number.
Thumbwheels on the end cap are used to preset the starting number.

$535.00

EDV202-4D-N1-C-KY

Indoor, 4-digit. Dims.: 11.75" L x 3.5 H x 2" D Control Box / Mounting Brackets are Included. This model will display real-time information to your employees or customers. The display will up count OR down count by one. Included with the display is a control box with all the switches required to preset/reset, start and stop. A terminal block inside the unit allows for a customer-supplied contact closure to be wired to control the display.

2.25" Bright Numbers
11.75" L x 3.5 H x 2" D
Programmable keypad Included
20 feet of cable provided
Up-counter by one with a reset to "0"
Terminal block to wire customer supplied contacts

$279.00

EDV300-003-8D-N1-IR

This display will increment or decrement by one every hour or at any rate. Perfect for making safety a priority! IR remote to program the 8 digit display is included.

Bright, 3" High Numbers! 8 Digits
26"L x 6.25"H
Program to count by a specified time
Battery Backup to Retain the Last Number Displayed
4 Ft., 120VAC Power Plug
IR Remote with Battery
Mounting Brackets
Instructions

$349.00

ED206-109-4D-N1

Indoor, Four Digit. Visible up to 90 Feet Away Dimensions: 12"L x 4"H x 2.25"D The display will advance by "1" for every activation of a customer-supplied momentary switch. A separate momentary switch will reset the unit to "0". 5VDC to 24VDC required to activate the inputs - "wet" contact. EDI also supplies an on-board 14VDC Power supply - "dry" contact

Increments By "1" with reset to "0"
Enclosure Dimensions: 12"L x 4"H x 2.25"D
2.25" Display with Four Digits
Visible up to 90 feet
Counter will advance by one with a momentary contact closure, and reset to "0" another.
Power: 120VAC @ 60Hz. / Six-foot line cord
Two Mounting Brackets
Complete Instructions

$395.00

ED206-109-6D-N1

Indoor, Six Digits. Visible up to 90 Feet Away Dimensions: 16"L x 4"H x 2.25"D The display will advance by "1" for every activation of a customer-supplied momentary switch. A separate momentary switch will reset the unit to "0". EDI also supplies an on-board 14VDC Power supply.

Increments by "1" and Reset to "0"
Enclosure Dimensions: 16"L x 4"H x 2.25"D
2.25" LED Display with Six Digits
Visible up to 90 feet
Counter will advance by one with a momentary contact closure, and reset to "0" another.
Power: 120VAC @ 60 Hz. / Six-foot line cord
Two Mounting Brackets
Complete Instructions

$485.00

ED206-110-4D-N1-3INP

This up/down counter is a way to tell. Features an increment input and a decrement input to display ACTUAL counts! The real-time nature of this display helps operators pace the line and meet goals.

Bright 2.25" High LED Display with Four Digits
Dimensions: 12"L x 4"H x 2.25"D
Up or Down Count by one. Counter will advance by one with a contact closure Decrement by "one" with a contact closure
Reset to "0" with another.

$395.00

ED206-115-4D-N1-KY

Dimensions: 12" L x 4.0" H x 2.25" D INCLUDES KEYPAD! TAKT time indicates a pace or rate of manufacturing matched to customer demand. TAKT time is used in lean manufacturing to align production time to demand where there are linked manufacturing processes. For example, advance by 3 every 10 seconds, advance by 1 every minute.

Dimensions: 12" L x 4.0" H x 2.25" D
Bright 2.25" High LED Display with Four to Twelve Digits
Rate Over Time Display. Example: Advance by "5" every "10" seconds.
Terminal Block to Wire Customer Supplied Inputs
Mounting Brackets / Optional Keypad Available / PC Software Included

$495.00

ED806-109-4D-N1

Indoor, 4-digit. Dims.: 36" L x 12"H x 3.0" D This model will display real-time information to your employees or customers. The display will up count by one. A terminal block inside the unit allows for a customer-supplied contact closure to be wired to control the display.

Large 8" Bright Numbers
Visible Up To 375 Feet!
Dimensions: 36" L x 11.5 H x 2.5" D
Up-counter by one with a reset to "0"
Counter will advance by one with a contact closure, and reset to "0" with another.

$995.00

EDV402-4D-N1-C-KY

Indoor, 4-digit, Dims.: 16.5" L x 5.5 H x 1.75" D Count Up or Down. Keypad to Program the Display is Included. This model will display real-time information to your employees or customers. The display will up count OR down count by one. Included with the display is a control box with all the switches required to preset/reset, start and stop. A terminal block inside the unit allows for a customer-supplied contact closure to be wired to control the display.

4" Bright Numbers
16.5" L x 5.5 H x 2" D
Programmable Keypad Included
20' of cable provided
Up-counter by one with a reset to "0"
Terminal block to wire customer supplied contacts

$339.00

ED202-112-4D-N1

NOTE: THIS IS NOT A REAL TIME UP-COUNTER! The display will AVERAGE the number of pulses coming into it over a time period (example: every minute). Dimensions: 12" L x 4.0" H x 2.25" D A standard four-digit counter that detects input impulses for rate per second, minute, hour or days. Ideal to monitor line speed! Six to twelve digits available. The unit has the option of refreshing every second, 10 seconds or 60 seconds. Customer-defined using dip-switches on the back of the unit.

2.25" High Numbers
Dimensions: 12" L x 4.0" H x 2.25" D
A standard four-digit counter that detects input impulses for rate per second, minute, hour or days.
Ideal to monitor line speed! Six to twelve digits available.

$495.00

ED206-110-6D-N1-3INP

This display will increment / decrement and reset to "0". Three customer supplied momentary contact closures will control the counting and reset.

Bright 2.25" High LED Display with Six Digits
Dimensions: 16"L x 4"H x 2.25"D
Up or Down Count by one. Counter will advance by one with a contact closure Decrement by "one" with a contact closure
Reset to "0" with another.

$595.00

ED402-112-4D-N1

NOTE: THIS IS NOT A REAL TIME UP-COUNTER! The display will AVERAGE the number of pulses coming into it over a time period (example: every minute). Dimensions: 20" L x 8.0" H x 2.25" D A standard four-digit counter that detects input impulses for rate per second, minute, hour or days. Ideal to monitor line speed! Six to twelve digits available. The unit has the option of refreshing every second, 10 seconds or 60 seconds. Customer-defined using dip-switches on the back of the unit.

4" High Numbers
Dimensions: 20" L x 8.0" H x 2.25" D
A standard four-digit counter that detects input impulses for rate per second, minute, hour or days.
Ideal to monitor line speed! Six to twelve digits available.

$595.00

ED406-109-4D-N1

CALL FOR QUANTITY DISCOUNTS! Viewable up to 200 Feet Away. Dimensions: 20"L x 8"H x 2.5"D Display real-time information to your employees or customers. The display will advance by "1" for every activation of a customer-supplied momentary switch. A separate momentary switch will reset the unit to "0". Customer-supplied voltage to activate: 5 to 24VDC for a "wet" contact. EDI also supplies an on-board 14VDC Power supply - "dry" contact.

Increments by "1" / Reset to "0" with two momentary contacts
Dimensions: 20"L x 8"H x 2.25"D
4" LED Display with four Digits
Visible up to 190 feet
Customer-supplied voltage to activate: 5 to 24VDC for a "wet" contact.
EDI also supplies an on-board 14VDC Power supply - "dry" contact.
Six-foot line cord for power (longer available upon request)
Two mounting brackets provided

$495.00

ED406-110-4D-N1

Indoor, 4 digit. Dimensions: 20"L x 8"H x 2.25"D Count up or down. Thumbwheel preset standard. Serial preset available. Two momentary inputs: increment/decrement by 1, preset to value. "Wet" or "Dry" contacts. Photo-eye, limit switch, etc. Ideal for assembly line production.

Dimensions: 20"L x 8"H x 2.25"D
Bright 4.0" High LED Display with Four Digits
Counter will advance or decrement by "one" with a contact closure and preset to customer-defined number with another.
Thumbwheels to preset the number.

$695.00

ED406-115-4D-N1-KY

Dimensions: 20" L x 8" H x 2.25" D INCLUDES KEYPAD! TAKT time indicates a pace or rate of manufacturing matched to customer demand. TAKT time is used in lean manufacturing to align production time to demand where there are linked manufacturing processes. For example, advance by 3 every 10 seconds, advance by 1 every minute.

Dimensions: 20" L x 8" H x 2.25" D
Bright 4.0" High LED Display with Four to Twelve Digits
Rate Over Time Display. Example: Advance by "5" every "10" seconds.
Terminal Block to Wire Customer Supplied Inputs
Mounting Brackets / Optional Keypad Available / PC Software Included

$745.00

EDV180-4D-Days

Keep Safety in Mind! This display will increment or decrement by one every 24 hours. Perfect for counting safety days! IR remote to program included.

Dimensions: 9"L x 4"H x 2"D
Bright, 1.8" High Numbers!
Battery Backup to Retain the Last Number Displayed
4 Ft., 120VAC Power Plug
IR Remote with Battery

$239.00

ED600D-112-4D-N1

NOTE: THIS IS NOT A REAL TIME UP-COUNTER! The display will AVERAGE the number of pulses coming into it over a time period (example: every minute) Dimensions: 26" L x 9.4" H x 2.25" D A standard four-digit counter that detects input impulses for rate per second, minute, hour or days. Ideal to monitor line speed! Six to twelve digits available. The unit has the option of refreshing every second, 10 seconds or 60 seconds. Customer-defined using dip-switches on the back of the unit.

6.0" High Numbers
Dimensions: 26" L x 9.4" H x 2.25" D
A standard four-digit counter that detects input impulses for rate per second, minute, hour or days.
Ideal to monitor line speed! Six to twelve digits available.

Custom Counters - Perfect for Exhibits

TAKT time indicates a pace or rate of manufacturing matched to customer demand. TAKT time is used in lean manufacturing to align production time to demand where there are linked manufacturing processes. For example, advance by 3 every 10 seconds, advance by 1 every minute. These LED displays are ideal for exhibits, trade shows, sales forecasts or anywhere an event has to be achieved! Available in 2.25" / 4" / 6" / 8" and 12" high numbers! Up to 16 digits can be ordered!

Custom Designs
Up to 16 Digits Long
2" / 4" / 6" / 8" and 12" High Numbers
Program the Time and the Rate
Count every second, minute, hour, day
Indoor and Outdoor Models Available

ED406-109-6D-N1

Indoor, Six Digit. Viewable up to 200 Feet Away Dimensions: 26"L x 8"H x 2.25"D Display real-time information to your employees or customers. The display will advance by "1" for every activation of a customer-supplied momentary switch. A separate momentary switch will reset the unit to "0". Customer-supplied voltage to activate: 5 to 24VDC for a "wet" contact. EDI also supplies an on-board 14VDC Power supply - "dry" contact.

Increments by "1" / Reset to "0" with two momentary contacts
Dimensions: 26"L x 8"H x 2.25"D
4" LED Display with Six Digits
Visible up to 190 feet
Customer-supplied voltage to activate: 5 to 24VDC for a "wet" contact.
EDI also supplies an on-board 14VDC Power supply - "dry" contact.
Six-foot line cord for power (longer available upon request)
Two mounting brackets provided

$695.00

ED406-110-4D-N1-3INP

Dimensions: 20" x 8" x 3". Features an increment input and a decrement input to display ACTUAL counts! The real-time nature of this display helps operators pace the line and meet goals. Display real-time production information to your employees or customers. The display will up count by one with a momentary switch. It will down-count by one when a customer-supplied momentary switch is activated. A separate momentary switch will reset the unit to "0". Three customer-supplied switch input (UP / DOWN / RESET TO "0").

Bright 4.0" High LED Display with Four Digits
Up or Down Count by one. Counter will advance by one with a contact closure, decrement by "one" with a contact closure and reset to "0" another.
Terminal Block to Wire in Three Customer Supplied Contacts (UP / DOWN / RESET)
Mounting Brackets
Optional Control Box With 10 Feet of Cable

$545.00

ED600D-110-4D-N1

Indoor, 4 digit. Dimensions: 26"L x 9.4"H x 3"D. Keypad provided to preset the display. Display real-time production information to your employees or customers. The display will up-count or down-count by one when a customer-supplied on/off switch is activated. A separate momentary switch will preset the unit to a value designated from a remote keypad (included).

Dimensions: 26"L x 9.4"H x 3"D
Bright 6.0" High LED Display with Four Digits
Up or Down Count by one. Counter will advance or decrement by "one" with a contact closure and preset to customer-defined number with another.
A remote detachable keypad is used to preset the starting number.
Terminal Block to Wire in Two Customer Supplied Contacts (Count / Preset)

ED800D-110-4D-N1

Indoor, 4 digit. Dimensions: 36"L x 11.4"H x 3"D. Keypad provided to preset the display. Display real-time production information to your employees or customers. The display will up-count or down-count by one when a customer-supplied on/off switch is activated. A separate momentary switch will preset the unit to a value designated from a remote keypad (included).

Dimensions: 36"L x 11.4"H x 3"D
Bright 8.0" High LED Display with Four Digits
Visible up to 375 feet
Up or Down Count by one. Counter will advance or decrement by "one" with a contact closure and preset to customer-defined number with another.
A remote detachable keypad is used to preset the starting number.
Terminal Block to Wire in Two Customer Supplied Contacts (Count / Preset)

ED800D-112-4D-N1

Dimensions: 30" L x 11.5" H x 2.25" D A standard four-digit counter that detects input impulses for rate per second, minute, hour or days. Ideal to monitor line speed! Six to twelve digits available. The unit has the option of refreshing every second, 10 seconds or 60 seconds. Customer-defined using dip-switches on the back of the unit.

8.0" High Numbers
Dimensions: 30" L x 11.5" H x 2.25" D
A standard four-digit counter that detects input impulses for rate per second, minute, hour or days.
Ideal to monitor line speed! Six to twelve digits available.

ED1200D-112-4D-N1

NOTE: THIS IS NOT A REAL TIME UP-COUNTER! The display will AVERAGE the number of pulses coming into it over a time period (example: every minute). Dimensions: 52" L x 17.7" H x 2.25" D A standard four-digit counter that detects input impulses for rate per second, minute, hour or days. Ideal to monitor line speed! Six to twelve digits available. The unit has the option of refreshing every second, 10 seconds or 60 seconds. Customer-defined using dip-switches on the back of the unit.

12" High Numbers
Dimensions: 52" L x 17.7" H x 2.25" D
A standard four-digit counter that detects input impulses for rate per second, minute, hour or days.
Ideal to monitor line speed! Four to twelve digits available.

Please Fill Out The Form Below

Digital Totalizers

Digital Totalizers

Totalizers

Value Priced Totalizers

Up / Down Totalizers

TAKT / Rate Totalizers

Pulse Totalizers

ED206-110-4D-AO-Stack

ED206-110-4D-N1

EDV202-4D-N1-C-KY

EDV300-003-8D-N1-IR

ED206-109-4D-N1

ED206-109-6D-N1

ED206-110-4D-N1-3INP

ED206-115-4D-N1-KY

ED806-109-4D-N1

EDV402-4D-N1-C-KY

ED202-112-4D-N1

ED206-110-6D-N1-3INP

ED402-112-4D-N1

ED406-109-4D-N1

ED406-110-4D-N1

ED406-115-4D-N1-KY

EDV180-4D-Days

ED600D-112-4D-N1

Custom Counters - Perfect for Exhibits

ED406-109-6D-N1

ED406-110-4D-N1-3INP

ED600D-110-4D-N1

ED800D-110-4D-N1

ED800D-112-4D-N1

ED1200D-112-4D-N1

Over 40 Years Providing Quality LED Display Products

Products

Contact Us