Production scoreboard visual management tool with takt countdown timer for all production areas measuring performance. This lean board allows leadership and support personnel to monitor production progress hour by hour and the takt countdown function also helps production employees have an awareness of where the stand as they compare their standard work progress to the takt countdown. This board is self contained and ready for use requiring little maintenance support to install.
In our experience these displays can improve productivity by a minimum of 5% immediately after installation.
Product Information:
-
2.25 inch high numeric display.
-
Viewing distance up to 90-100 feet.
-
Four digits on all lines.
-
All Text will be done in fixed white vinyl lettering.
-
The actual line can be fed from a signal from a machine (5 to 24VDC). Optional photo-eye can be used to increment the Actual line on the display. Photo-eye includes a reflector and cable to mount to a conveyor to count parts or machine to detect machine cycles.
-
Keypad supplied with 10 feet of cable.
-
Approximate Dimensions: 18”L x 20”H x 2.5”D
-
Power Requirements: 120 VAC / 60 HZ ; 6 ft. line cord provided
Physical Specifications:
- Designed to be installed and viewed indoors
- Operating Environment: 32 to 120 degress F / 0 to 95% humidity
- UL listed power supply
- NEMA 1 Rated
- Enclosure color/material: Black extruded aluminum
- Mounting method: two wall hanging mounting brackets provided
Scoreboard Operation - Using the keypad, the user enters a goal and shift time from the keypad. The display shows an incrementing value based on the 2 values. Example: User enters 1000 for the goal and 0800 (8 Hrs) for the shift. The goal display will increment periodically throughout the shift showing how many parts should be produced. At the end of 8 hours, it will show 1000. The keypad includes a reset button to reset the display at the end of the shift for the next shift.
The actual line is fed by a photo eye(optional). This photo eye can be mounted to detect product movement or machine cycles as each unit is completed. If a different method of triggering the display is desired, the input will accept a 5VDC – 24VDC or a dry contact closure for operation. A run/hold input is available to place the display in hold during breaks or lunches.
The top line countdown timer is set with the Keypad. The timer is wired to continually run. The unit is wired internally so that when a signal is received to advance the actual line on the hour by hour counter the countdown timer will reset and start counting down again. A Run/hold input is available to place the display in hold during breaks or lunches.
